Scythe FUMA SCFM-1000 Twin Tower CPU Air Cooler
Scythe has a history of building CPU air coolers that not only perform well, but are also are a value in terms of your hard earned money. The FUMA cooler is built with the PC hardware enthusiast in mind and sports multiple fan configurations and comes supplied with two fans so you do not have any added cost.
Today we are reviewing a CPU cooler from one of my favorite companies. The CPU cooler is the FUMA model SCFM-1000 and the company is Scythe. The reason I say Scythe is a favorite of mine is because the company keeps a low profile in between product launches and then releases a new cooler which pushes the bar higher and higher each time. Scythe is very focused in its approach and this sits well with me.
The FUMA is a dual tower style cooler paired with two fans, a dense array of fins and six heat pipes coated in a nickel plated finish.
We have seen this type of design used before with the Noctua NH-D15, Noctua NH-D14, and the Cryorig R1 Ult. with mixed results. Hopefully, Scythe has figured out how to improve this design and make it perform even better.
Today's review takes place on our fourth generation [H]ard platform. The test bed consists of the ASUS Z87-Deluxe motherboard, eight gigabytes of Corsair 1600 MHz DDR3 RAM and the Intel Core i7-4770K.
The biggest change you will notice is the removal of hardware testing. In recent years, Intel has shifted its methods of testing to software based and so we find it acceptable to do the same.
Once again we have an integrated GPU in our processor which alleviates the need for a discrete one. With the removal of a discrete GPU comes the advantage of not having an additional variable to account for.
The iGPU will not create any anomalies in our testing as long as we practice consistent testing methods.
Corsair was kind enough to provide us with its Carbide series chassis. It provides excellent airflow and interior space and is a good reflection on current case design.
Noctua's NT-H1 thermal paste was selected as the thermal interface material (TIM) of choice for a few key reasons. The thermal paste has been shown to provide excellent thermal conductivity allowing the heat sinks to better do its job. There is no observed curing time. That is, performance does not get any better over time. Any curing time could have introduced variables into the equation causing at best dubious results and at worst unreliable ones.
Ambient temperature will be kept at 25C for the duration of the tests and measured with a MicroTemp EXP non-contact infrared thermometer and cross referenced with the Sperry Digital 4 Point thermometer. Any variance greater then 0.2C will halt the testing until temperatures return within spec for fifteen minutes.
Idle temperatures will be recorded after a twenty minute period of inactivity. Any fluctuation during the last sixty seconds will reset the timer for an additional five minutes.
Load temperatures will be recorded after a twenty minute period for air cooled systems, and thirty minutes for liquid cooled systems, at 100% load. To obtain this load we will be using AIDA64 Extreme Edition v3.00.2500. This places an even greater load on the CPU than before and includes some benefits. Because the load is so extreme we see the temperature vary wildly from 72C to 86C in some instances. To get an accurate reading we will utilize AIDA64’s ability to average the temperature over time. Given twenty/thirty minutes at 100% load we arrive at a temperature that accurately represents our heatsink’s performance.
Sound levels will be measured with a Reliability Direct AR824 sound meter from a distance of four feet away. With everything turned off and the room completely silent the meter registered a sound level of 38dB(A). This is a very quiet room where a simple pin drop could be heard. All sound measurements are recorded in the very late evening to further reduce any ambient noise.